Good for: all hair types

Benefits & Features: 

• Turbo airflow slashes drying time
• 2 barrel sizes for versatile styling
• Crease-free hair straightening
• Locks in moisture & shine
• Produces long-lasting style 
• Beautifully & ergonomically designed
• Negative ion technology
• Digital temperature control
• 60 minute auto shut-off
• Professional length 360° swivel cords

Specifications:

Turbo Blow Dryer

• Rated Voltage: 125V 
• Frequency (Hz): 60Hz 
• Rated Wattage: 1875W 
• Length of AC Cord: 9 ft. | 2.7 m

Interchangeable Curling Wand with 25 & 32mm Titanium Barrels

• Rated Voltage: 110-240V 
• Frequency (Hz): 50/60Hz
• Rated Wattage: 32mm: 50W | 25mm: 40W
• Length of AC Cord: 9 ft. | 2.7 m

1” Ceramic Flat Iron

• Rated Voltage: 110-240V 
• Frequency (Hz): 50/60Hz 
• Rated Wattage: 40W
• Length of AC Cord: 9 ft. | 2.7 m

Turbo Blow Dryer:

1. Apply your L’ange heat protectant of choice.
2. Select preferred heat and airflow levels.
3. Gently rough dry hair on lower heat until approximately 70% dry.
4. Next, using a higher heat setting, finish blow drying with your brush of choice.
5. Work the brush through hair, aiming the airflow in a downward motion. 
6. Complete until the desired look is achieved. 
7. Use the cool shot setting to lock-in your style. 

Interchangeable Curling Wand with 25 & 32mm Titanium Barrels:

1. Make sure your wand is completely cool before changing barrels. 
2. To remove an existing barrel, twist the barrel lock on the handle to the right until it reaches the unlock icon. 
3. Once in the unlocked position, pull out the barrel to remove. 
4. To insert a new barrel, line up the tabs with the corresponding cutouts inside the top of the handle. 
5. Push down firmly until it clicks into place. 
6. Twist the barrel lock to the left until it aligns with the lock icon. 
7. Hair should be completely dry and detangled before using the curling wand. 
8. Apply your L’ange heat protectant of choice. 
9. Wear the heat resistant glove on the hand that will be wrapping your hair. 
10. Keep the handle of the wand facing up and the tip downward. 
11. For extra volume, place the base of the wand near the root of your hair. 
12. Starting at the base, begin winding a 1” section of hair around the barrel. 
13. Keep your hair wrapped for 5–10 seconds, then release, letting the curl slide out.
14. Repeat on remaining sections until desired style is achieved.

Pro Tip: For more defined curls, wrap smaller sections of hair around the barrel and larger sections for loose, relaxed curls. 

1” Ceramic Flat Iron:

1. Apply the L’ange heat protectant of your choice.
2. Brush to distribute evenly and detangle hair prior to styling.
3. Insert a 1” section of hair between the plates. 
4. Starting near your roots, gently press down.
5. Glide the iron from root to tip at a moderate pace.
6. Repeat until desired style is achieved.